EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 106)

IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
95
Insert: The freeze is added to the element images, so the total duration of
the element is increased with the duration of the freeze.
6. Select the desired Freeze type:
Freeze on field: The freeze will be applied to the image field.
Freeze on frame: The freeze will be applied to the image frame.
7. Click OK to confirm.
The original element is now split into three (or two) elements:
1. Element before the freeze
2. Freeze element
3. Element after the freeze
If the Freeze is inserted at the TC IN of the element, the original element will be
split in two. A freeze cannot be inserted at the end of an element.
R
EMOVING A
F
REEZE
E
FFECT
Introduction
After inserting a Freeze in a Playlist element, the contextual menu of the Freeze
element that was created, will show the Remove Freeze command.
Remove Freeze does not remove the inserted elements. It just removes the freeze
property of the selected element.
Note
If you wish to undo the Insert Freeze command, use Ctrl-Z to perform a
standard Undo operation.
How to Remove the Freeze Property of a Playlist Element
To remove the Freeze property of a Playlist element, proceed as follows:
1. Select the Freeze element in the Playlist.
2. Right-click the element and select Remove Freeze:
The Freeze property of the element is removed and it is returned to a
normal element state.