6 inserting a freeze effect in a playlist element, Introduction, How to insert a freeze in a playlist element – EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual User Manual
Page 105: Inserting a freeze effect in a playlist element, Nserting a, Reeze, Ffect in a, Laylist, Lement
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
94
1.7.6 I
NSERTING A
F
REEZE
E
FFECT IN A
P
LAYLIST
E
LEMENT
I
NTRODUCTION
You can insert a Freeze effect in a playlist element, at a certain time code. The
frame on which the Freeze is inserted will become a still image for the specified
duration.
H
OW TO
I
NSERT A
F
REEZE IN A
P
LAYLIST
E
LEMENT
To insert a freeze in a Playlist element, proceed as follows:
1.
Browse the playlist element to the image that you want to freeze.
2.
Right-click the playlist element and select Insert Freeze:
The Freeze window opens.
3.
The Freeze at TC field shows the TC IN of the selected playlist element. If
needed, enter the TC value where you want the Freeze effect to start.
The maximum duration, shown below the Duration field, is calculated from
the Freeze at TC value to TC OUT.
4.
Do one of the following:
•
Enter the duration of the Freeze effect in the Duration field. The resulting
TC OUT for the Freeze is calculated and shown in the TC OUT field.
•
Enter the TC value for the end of the Freeze effect in the TC OUT field.
The duration of the effect is automatically calculated.
5.
Select the desired Freeze mode:
Overwrite: The freeze overwrites the images in the element for the duration
of the freeze.