Acnodes FPC 6084 User Manual

Page 88

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

PNP OS Installed [No]

The PNP OS Installed option determines whether the Plug and Play devices connected to the system are
configured by the operating system or the BIOS.

No (Default)

If the operating system does not meet the Plug and Play specifications,

BIOS configures all the devices in the system.

Yes

Set this option if the system is running Plug and Play aware operating sys

tems. The operating system changes the interrupt, I/O, and DMA settings.

Reset Configuration Data [Disabled]

Use the Reset Configuration Data option to reset the Extended System Configuration Data (ESCD) when
exiting setup if booting problems occur after a new add-on is installed.

Disabled(Default)

ESCD will not be reconfigured

Enabled

ESCD will be reconfigured after you exit setup

Resources Controlled By [Auto (ESCD)]

Use the Resources Controlled By option to either manually configure all the boot and plug and play devices,
or allow BIOS to configure these devices automatically. If BIOS is allowed to configure the devices auto-
matically IRQs, DMA and memory base address fields cannot be set manually.

Auto(ESCD) (Default)

BIOS automatically configures plug and play devices as well as
boot devices.

Manual

Manually configure the plug and play devices and any

other boot devices.