Acnodes FPC 6084 User Manual

Page 87

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

x Suspend Mode [Disabled]

The Suspend Mode option can only be selected if the Power Management option is set to Legacy. The
Suspend Mode specifies the amount of time the system can be inactive before the system enters suspend
mode. The Suspend Mode options are:

Disabled (Default)
1 Sec
5 Sec
10 Sec
15 Sec
30 Sec
45 Sec
1 Min
5 Min
10 Min
15 Min
30 Min
45 Min
60 Min
90 Min
120 Min

Soft-Off by PWR-BTTN [Instant-Off]

Use the Soft-Off by PWR-BTTN option to enabled the system to enter a very low-power-usage state
when the power button is pressed.

Instant-Off (Default) When the power button is pressed, the system is immediately shutdown.

Delay 4-sec To shutdown the system the power button must be held down longer than four seconds

otherwise the system enters a low power usage state.

5.7 PnP/PCI Configurations
Use the PnP/PCI Configurations menu (BIOS Menu 10) to set the plug and play, and PCI options.