Acnodes FPC 6084 User Manual

Page 79

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

5.5 INTEGRATED PERIPHERALS

Use the Integrated Peripherals menu (BIOS Menu 6) to change the configuration options for the attached
peripheral devices.

On-Chip IDE Channel 1 [Enabled]

Use the On-Chip IDE Channel 1 option to specify if the system uses the integrated primary IDE channel or
not.

Disabled

The primary IDE channel is not used.

Enabled (Default)

The primary IDE channel is used.

Drive PIO Mode [Auto]

Use the Drive PIO Mode options below to select the Programmed Input/Output (PIO) mode for the following
HDDs:

Master Drive PIO Mode
Slave Drive PIO Mode

Auto(Default)

The computer selects the correct mode.

Mode 0

PIO mode 0 selected with a maximum transfer rate of 3.3MBps.

Mode 1

PIO mode 1 selected with a maximum transfer rate of 5.2MBps.

Mode 2

PIO mode 2 selected with a maximum transfer rate of 8.3MBps.

Mode 3

PIO mode 3 selected with a maximum transfer rate of 11.1MBps.

Mode 4

PIO mode 4 selected with a maximum transfer rate of 16.6MBps.

Mode 5

PIO mode 5 selected with a maximum transfer rate of 22.2MBps.