Acnodes FPC 6084 User Manual

Page 81

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Onboard Serial Port 3 [Disabled]

Use the Onboard Serial Port 3 option to select the I/O address and IRQ for the onboard serial port 2. The
serial port can be disabled or the I/O address and the IRQ can be automatically selected by the BIOS. The
Onboard Serial Port 3 options are:

Disabled (Default)
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto

Onboard Parallel Port [378/IRQ7]

Use the Onboard Parallel Port option to specify a logical LPT port address and corresponding
interrupt for the physical parallel port. The Onboard Parallel Port options are:

Disabled
378/IRQ7 (Default)
278/IRQ5
3BC/IRQ7

Parallel Port Mode [SPP]

Use the Parallel Port Mode option to select parallel port operation mode.

SPP (Default)

The parallel port operates in the standard parallel port (SPP) mode. This
parallel port mode works with most parallel port devices but is slow.

EPP

The parallel port operates in the enhanced parallel port mode (EPP). The
EPP mode supports bi-directional communication between the system and
the parallel port device and the transmission rates between the two are much
faster than the SPP mode.

ECP

The parallel port operates in the extended capabilitiesport (ECP) mode. The
ECP mode supports bi-directional communication between the system and the
parallel port device and the transmission rates between the two are much
faster than the SPP mode.

ECP+EPP

The parallel port is compatible with both ECP and EPP devices.

Normal

EPP Mode Select [EPP1.7]

The EPP Mode Select option is only available if the Parallel Port Mode option is set to
EPP mode. Use the EPP Mode Select option to select the parallel port mode standard for the parallel port.

EPP1.9

EPP 1.9 is selected as the EPP standard.

EPP1.7(Default)

EPP 1.7 is selected as the EPP standard.