Acnodes FPC 6084 - Manual (Page 66)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6065 / 6084
inaccessible and any drives attached to it are
undetected.
Auto (Default)
Setting this option allows the device to be automatically
detected by the BIOS.
Manual
Selecting this option allows manual configuration of the
device on the IDE channel in BIOS.
Access Mode [Auto]
The Access Mode option can only be configured if the BIOS configuration option is set to either Manual or
Auto.. Use the Access Mode option to determine the hard disk BIOS translation modes. Most systems now
use hard drives with large capacities and therefore either the LBA translation mode or auto mode should
be selected.
CHS
Select this mode if the HDD capacity is less than 504MB.
LBA
Select this mode if the HDD capacity is more than 8.4GB.
Large
This mode is an extended ECHS mode and while it supports HDDs
larger than 504MB, it is not
recommended.
Auto (Default)
If you are unsure of what access mode to set, select this option.
Capacity
The Capacity specification indicates the storage capacity of the HDD installed in the system.
Cylinder
The Cylinder specification indicates how many cylinders (tracks) are on the HDD installed in the
system.
Head
The Head specification indicates how many logical heads are on the HDD installed in the system.