5 din mounting – Acnodes FPC 6084 User Manual

Page 55

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Step 4: Follow the Step 4 and Step 5 of the FPC6065Cabinet and Rack Installation procedures to com-
plete the whole installation process.

3.12.5 DIN MOUNTING

To mount the FPC6065/FPC6084 flat panel PC onto a DIN rail, please follow the steps below.

Step 1: Attach the DIN rail mounting bracket to the rear of the panel PC. Secure the bracket to the panel
PC with the supplied retention screws (Figure 3-37).

Step 2: Make sure the inserted screw in the center of the bracket is at the lowest position of the elongated
hole (Figure 3-38).

Step 3: Place the DIN rail flush against the back of the mounting bracket making sure the edges of the rail
are between the upper and lower clamps (Figure 3-39).