4 cabinet and rack installation – Acnodes FPC 6084 User Manual

Page 52

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws through the bottom
of the mounting arm interface pad and into the flat panel PC.

3.12.4

CABINET AND RACK INSTALLATION

The FPC6065/FPC6084 flat panel PC can be installed into a cabinet or rack. The installation procedures
are similar to the panel mounting installation. To do this, please follow the steps below:

NOTE: When purchasing the cabinet/rack installation bracket, make sure it is compatible with both the
FPC6065/FPC6084 flat panel PC and the rack/cabinet into which the FPC6065/FPC6084 is installed.

3.12.4.1

FPC6065 CABINET AND RACK INSTALLATION

Step 1: Slide the rear chassis of the FPC6065 flat panel PC through the rack/cabinet bracket until the
aluminum frame is flush against the front of the bracket (Figure 3-32).