Acnodes FPC 6084 - Manual (Page 27)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6065 / 6084
CHAPTER 3
INSTALLATION AND CONFIGURATION
3.1 INSTALLATION PRECAUTIONS
When installing the flat panel PC, please follow the precautions listed below:
Power turned off:
When installing the flat panel PC, make sure the power is off. Failing to turn off the power may cause se-
vere injury to the body and/or damage to the system.
Certified Engineers:
Only certified engineers should install and modify onboard functionalities.
Mounting:
The flat panel PC is a heavy device. When mounting the system onto a rack, panel, wall or arm please
make sure that at least two people are assisting with the procedure.
Anti-static Discharge:
If a user open the rear panel of the flat panel PC, to configure the jumpers or plug in added peripheral
devices, ground themselves first and wear and anti-static wristband.
3.2 PREINSTALLED COMPONENTS
The following components are all preinstalled.
Motherboard
TFT LCD screen
Power module
Power switch
Preinstalled OEM customizations may include the following.
Hard disk drive (HDD)
Resistive type touch screen
Installation of some of the components are described in the following sections.