Acnodes FPC 6084 User Manual

Page 43

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Step 6: Insert all previously removed retention screws into the FPC6084 to secure the chassis.

Step 7: Install the previously removed HDD bracket.

Step 8: Replace the top cover. Once replaced reinsert the six previously removed retention screws.

3.10 MEMORY MODULE INSTALLATION

The flat panel PC embedded motherboard has one 200-pin SO-DIMM socket. To install the SO-DIMM
module, follow the instructions below.

Step 1: Remove the back cover. See Section 3.5 above.

Step 2: Locate the SO-DIMM socket on the motherboard of the flat panel PC.

Step 3: Push the SO-DIMM chip into the socket at an angle. (See Figure 3-23)

Step 4: Gently pull the arms of the SO-DIMM socket out and push the rear of the SO-DIMM module down.
(See Figure 3-23)

Step 5: Release the arms on the SO-DIMM socket. They clip into place and secure the SO-DIMM module
in the socket.