Acnodes FPC 6084 User Manual

Page 39

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Step 4:Connect the IDE/SATA cable from the IDE/SATA connector on the motherboard
to the rear of HDD.

Step 5: Install the HDD into the FPC6084 by aligning the retention screw holes in the
base of the HDD brackets with the retention screw holes on the platform. Insert the four
retention screws.

3.9

COMPACTFLASH CARD INSTALLATION

3.9.1 FPC6065 CF CARD INSTALLATION

The FPC6065 embedded motherboard has one CF Type II slot on the solder side. To install the CF card,
follow the instructions below.

Step 1: Remove the back cover. See Section 3.5 above.

Step 2: Remove HDD bracket from the chassis. See Section 3.7.1 above.

Step 3: Remove the three retention screws on the bottom panel (Figure 3-15).