12 mounting the system, 1 wall mounting – Acnodes FPC 6084 User Manual

Page 46

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Step 7: Please "confirm" the Digital Signature Not Found window when it appears, when finished, please
restart the computer.

Step 8: Repeat step 1, but select ALi ATA/RAID Controller at step 4.

3.12 MOUNTING THE SYSTEM

WARNING!

When mounting the flat panel PC onto an arm, onto the wall or onto a panel, it is better to have more than
one person to help with the installation to make sure the panel PC does not fall down and get damaged.

The five methods of mounting the FPC6065/FPC6084 are listed below.

Wall mounting

Panel mounting

Arm mounting

Rack mounting

DIN mounting

The four mounting methods are described below.

3.12.1 WALL MOUNTING

To mount the flat panel PC onto the wall, please follow the steps below.

Step 1: Select the location on the wall for the wall-mounting bracket.

Step 2: Carefully mark the locations of the four bracket screw holes on the wall.

Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention screws.

Step 4: Align the wall-mounting bracket screw holes with the pilot holes.