Acnodes FPC 6084 User Manual

Page 48

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Step 8: Carefully insert the screws through the holes and gently pull the monitor downwards until the moni-
tor rests securely in the slotted holes (Figure 3-26). Ensure that all four of the mounting screws fit snuggly
into their respective slotted holes.

NOTE: In the diagram below the bracket is already installed on the wall.

3.12.2 PANEL MOUNTING
3.12.2.1

FPC6065 PANEL MOUNTING

To mount the FPC6065 flat panel PC into a panel, please follow the steps below.

Step 1: Select the position on the panel to mount the FPC6065.

Step 2: Cut out a section from the panel that corresponds to the rear panel dimensions of the FPC6065.
Take care that the panel section that is cut out is smaller than the overall size of the metal frame that sur-
rounds the FPC6065 but just large enough for the rear panel of the FPC6065 to fit through (Figure 3-27).