Acnodes FPC 6084 User Manual

Page 69

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Boot From LAN Control [Disabled]
Use the BOOT From LAN Control option to enable the system to be booted from a
remote system.

Disabled (Default)
The system cannot be booted from a remote system through the LAN.

Enabled
The system can be booted from a remote system through the LAN.

SATA Boot ROM Control [Disabled]
Use the SATA Boot ROM Control option to configure SATA IDE use in DOS mode.

Disabled (Default)

Disables SATA IDE use in DOS mode.

Enabled

Enables SATA IDE use in DOS mode.

Boot Device
Use the Boot Device options to select the order of the devices the system boots
from. There are three boot device configuration options:

First Boot Device [Default: HDD-0]
Second Boot Device [Default: CDROM]
Third Boot Device [Default: SCSI]

Using the default values, the system first looks for a HDD to boot from. If it cannot
find an HDD, it boots from a CD-ROM. If both The HDD and the CD-ROM are un-
available, the system boots from a SCSI drive.
Boot Device configuration options are:

Floppy
LS120
HDD-0
SCSI
CDROM