Acnodes FPC 6084 User Manual

Page 65

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Base Memory:

The Base Memory is NOT user configurable. The POST determines the amount of base (or conventional)
memory installed in the system. The value of the base memory is typically 512K for systems with 512K
memory installed, or 640K for systems with 640K or more memory installed.

Extended Memory

The Extended Memory is NOT user configurable. The BIOS determines how much extended memory is
present during the POST. This is the amount of memory above 1MB located in the memory address map
of the CPU.

Total Memory

The Total Memory is NOT user configurable.

5.2.1 IDE Primary Master/Slave

Use the IDE Primary Master/Slave menu to set or change the master/slave IDE configurations.

IDE HDD Auto-Detection [Press Enter]

Use the IDE HDD Auto-Detection option to enable BIOS to automatically detect the IDE settings. Select
IDE HDD Auto-Detection and press ENTER. BIOS automatically detects the HDD type. Do not set this
option manually.

IDE Primary Master [Auto]

Use the IDE Primary Master option to activate or deactivate the following drive channels:

Channel 0 Master
Channel 0 Slave
Channel 1 Master
Channel 1 Slave

None

If no drives are connected to the IDE channel select this option. Once set,

this

IDE

channel

becomes