Acnodes FPC 6084 User Manual

Page 58

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

CHAPTER 4 GASKEY REPLACEMENT

4.1 Gasket Replacement
A gasket used for a long time may gradually lose its ability to protect the monitor from
fluids and vapors; scratches or dirt may also accumulate. It is recommended that the
gasket be replaced yearly.

NOTE: If the monitor is mounted vertically, first remove it and place it on a flat, level
surface with the display screen facing down before changing the gasket.

Step 1: Remove the old gasket from the sides of the monitor.

Step 2: Attach the new gasket to the monitor. Make sure the gasket fits precisely into
the groove along the edges of the monitor's front panel (Figure 4-1).

NOTE: Compliance with the IP65 standard depends on correct installation of the
gasket. Be sure to check that the gasket is properly installed after changing it.