Acnodes FPC 6084 User Manual

Page 62

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

Set User Password

Use the Set User Password option to set the user password. By default no user password is set.
To install a user password, select this field and enter the password. After this option is selected, a red
dialogue box appears with "Enter Password: ". Type the password and press ENTER. Retype the original
password into the "Confirm Password: " dialogue box and press ENTER. To disable the password, simply
press ENTER in the "Enter Password: " dialogue box, then press any key in the "Password Disabled !!!"
dialogue box.

Save & Exit Setup

Use the Save & Exit Setup option to save any configuration changes made and exit the BIOS menus.

Exit Without Saving

Use the Exit Without Saving option to exit the BIOS menus without saving any configuration hanges.