Acnodes FPC 6084 User Manual

Page 61

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

NOTE: The following sections will completely describe the menus listed below and
the configuration options available to users.

The following menu options are seen in BIOS Menu 1.

Standard CMOS Features: Changes the basic system configuration.
Advanced BIOS Features: Changes the advanced system settings.
Advanced Chipset Features: Changes the chipset configuration features.
Integrated Peripherals: Changes the settings for integrated peripherals.
Power Management Setup: Configures power saving options.
PnP/PCI Configurations: Changes the advanced PCI/PnP settings.
PC Health Status: Monitors essential system parameters.

The following user configurable options are also available in BIOS Menu 1:

Load Fail-Safe Defaults

Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS
parameter in the setup menus. Press F6 for this operation on any page.

Load Optimized Defaults

Use the Load Optimized Defaults option to load optimal default values for each BIOS
parameter in the setup menus. Press F7 for this operation on any page.

Set Supervisor Password

Use the Set Supervisor Password option to set the supervisor password. By default, no supervisor
password is set. To install a supervisor password, select this field and enter the password. After this
option is selected, a red dialogue box appears with "Enter Password: ". Type the password and
press ENTER. Retype the original password into the "Confirm Password: " dialogue box and press
ENTER. To disable the password, simply press ENTER in the "Enter Password: " dialogue box,
then press any key in the "Password Disabled !!!" dialogue box.