Acnodes FPC 6084 User Manual

Page 86

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6065 / 6084

ACPI Function [Disabled]

Use the ACPI Function to enable the ACPI (Advanced Configuration and Power Interface) function.

Disabled

ACPI function disabled.

Enabled(Default)

ACPI function enabled.

ACPI Suspend Type [S1(POS)]

Use the ACPI Suspend Type BIOS option to specify the sleep state the system enters when not being used.

S1 (POS)(Default)

System appears off. The CPU is stopped; RAM is refreshed; the system
is running in a low power mode.

S3 (STR)

System appears off. The CPU has no power; RAM is in slow refresh; the

power supply is in a reduced power mode.

S1 & S3

Both suspend modes are implemented

Power Management [ACPI]

Use the Power Management option to set the power management type used by the system.

Disabled

All power management options are turned off. The only user configurable options
are the power button and alarm settings.

Legacy

Standby and suspend modes can be set.

APM (Default)

Advanced power management (APM) is activated

ACPI

Advanced Configuration and Power Interface (ACPI) is activated.

x Standby Mode [Disabled]

The Standby Mode option can only be selected if the Power Management option is set to Legacy. The
Standby Mode specifies the amount of time the system can be inactive before the system enters standby
mode. The Standby Mode options are:

Disabled (Default)
1 Sec

30Min

5 Sec

45Min

10 Sec

60Min

15 Sec

90Min

30 Sec

120Min

45 Sec
1 Min
5 Min
10 Min
15 Min