ZyXEL Communications 480 - Manual (Page 90)

Prestige 480 ISDN Router
6-14 Dial-In Server Configuration
6.4.4 Configuring the Prestige for Callback with CLID
The only difference between callback with CLID (Calling Line Identification) and callback
described above is that you do not pay for the first call i.e., when the Prestige on LAN 1 calls the
Prestige on LAN 2. The Prestige (LAN 2) looks at the ISDN D-Channel and verifies that the
calling number corresponds with that configured in Menu 11. If they do, the Prestige (LAN 2)
hangs up and calls the Prestige on LAN 1 back.
Prestige on LAN 2
Figure 6-13 Callback with CLID Configuration
Menu 11.1 - Remote Node Profile
Rem Node Name= LAN_1
Active= Yes
Call Direction= Both
Incoming:
Rem Login= lan1
Rem Password= *******
Rem CLID= 1234
Call Back= Yes
Outgoing:
My Login= lan2
My Password= ********
Authen= CHAP/PAP
Pri Phone #= 5678
Sec Phone #=
Edit PPP Options= No
Rem IP Addr= 192.168.1.1
Edit IP= No
Telco Option:
Transfer Type= 64K
Allocated Budget(min)=
Period(hr)=
Carrier Acess Code=
Nailed-Up Connection= N/A
Toll Period (Sec)= 0
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Enter here to CONFIRM or ESC to CANCEL:
This is how
the Prestige
on LAN 2
identifies
the Prestige
on LAN 1