ZyXEL Communications 480 - Manual (Page 87)

Prestige 480 ISDN Router
Dial-In Server Configuration 6-11
Configuring your Prestige
Figure 6-8 Configuring Menu 13 for Remote Access
Figure 6-9 Edit Dial-in-User for RAS
Note: The caller always controls Idle Timeout, so the Idle Timeout field does not apply when there
is callback.
Menu 13 - Default Dial-in Setup
Telco Options:
CLID Authen= None
PPP Options:
Recv Authen= PAP
Compression= Yes
Mutual Authen= No
PAP Login= N/A
PAP Password= N/A
Multiple Link Options:
Max Trans Rate= 256
Callback Budget Management:
Allocated Budget(min)=
Period(hr)=
IP Address Supplied By:
Dial-in User= Yes
IP Pool= Yes
IP Start Addr= 192.168.250.250
IP Count(1,4)= 2
Session Options:
Edit Filter Sets= No
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
This must be
PAP for
Windows
IP Pool for
RAS Clients
Menu 14.1 - Edit Dial-in User
User Name= ----
Active= Yes
Password= ----
Callback= No
Phone # Supplied by Caller= N/A
Callback Phone #= N/A
Rem CLID=
Idle Timeout= 300
Press ENTER to Confirm or ESC to Cancel:
The User
name and
Password
must be the
same as in
Dial-Up
Networking in
Windows.