ZyXEL Communications 480 - Manual (Page 34)

Prestige 480 ISDN Router
2-4 Hardware Installation and Setup
2.5 Housing
Your Prestige's housing has ventilation slots for cooling and clip-out legs that fit snugly into
grooves for sturdy stacking with better airflow. ZyXEL recommends that you do not stack more
than 4 routers for maximum stack stability and cooling.
2.6 Power On Your Prestige
At this point, you should have connected the console port, the ISDN BRI port, the Ethernet port
and the power port to the appropriate devices or lines.
Step 1. Initial Screen
When you power on your Prestige, it performs several internal tests as well as line initialization.
After the initialization, the Prestige asks you to press [Enter] to continue, as shown.
Figure 2-3 Power-On Display
Step 2. Entering Password
The login screen appears after you press [Enter], prompting you to enter the password, as shown
next.
For your first login, enter the default password 1234 . As you type the password, the screen
displays a (X) for each character you type.
Figure 2-4 Login Screen
Enter Password : XXXX
Copyright (c) 1994 - 1999 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:a0:c5:ff:00:35
(2) DSS1:
(2) DSS1:
Resetting ISDN 1...
Resetting ISDN 2...
Press ENTER to continue...