ZyXEL Communications 480 User Manual
Page 122
Prestige 480 ISDN Router
11-4
System Maintenance
TxPkts
Shows the number of transmitted packets on this channel.
RxPkts
Shows the number of received packets on this channel.
Errors
Shows the number of error packets on this channel.
CLU
(Current Line Utilization) percentage of current bandwidth used on this channel
ALU
(Average Line Utilization) a 5-second moving average of channel usage for this
channel.
Up Time
Shows the time this channel has been connected to the current remote node
Ethernet
(Ethernet connection).
Status
Shows the current transmission speed and mode of the LAN.
TxPkts
Shows the number of transmitted packets to the LAN.
RxPkts
Shows the number of received packets from the LAN.
Collisions
Shows the number of collisions.
LAN Packet
Which Triggered
Last Call
Shows the first 48 octets of the LAN packet that triggered the last outgoing call.
Total Outcall Time
Shows the total outgoing call time for both B1 and B2 channels since the system
has been powered up.
CPU Load
Specifies the percentage of CPU utilization.
Press Command:
COMMANDS
1
Drops the B1 channel of ISDN line 1.
2
Drops the B2 channel of ISDN line 1.
3
Drops the B1 channel of ISDN line 2.
4
Drops the B2 channel of ISDN line 2.
5
Resets counters means that all statistics, except Uptime are reset to zero.
6
Drop All means all ISDN line channels are dropped.
9
Toggles status means you can see alternative information such as the Prestige IP
address and CLID as well as the peer's IP address and CLID (see next figure).
ESC
Exits this menu and takes you back to the previous menu.