ZyXEL Communications 480 - Manual (Page 61)

Prestige 480 ISDN Router
Remote Node Configuration 4-3
Table 4-1 Remote Node Profile Menu Fields
Field Description Options
Rem Node Name This is a required field [?]. Enter a descriptive name for the
remote node, for example, Corp.
This field can be up to eight characters. This name must be
unique from any other remote node name or remote dial-in user
name.
Active Press the space bar to toggle between Yes and No. Inactive
nodes are displayed with a minus sign (-) at the beginning of the
name in Menu 11. Press space
bar to toggle
Yes/No
If this parameter is set to Both, your Prestige can both
place and receive calls to/from this remote node.
Both
If set to Incoming, your Prestige will not place a call to this
remote node.
Incoming
If set to Outgoing, your Prestige will drop any incoming
calls from this remote node.
Outgoing
Call Direction
Several other fields in this menu depend on this parameter. For
example, in order to enable Callback, the Call Direction must
be Both.
Incoming: Rem
Node
Login
Name Enter the login name that this remote node will use when it calls
your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate this node.
Incoming: Rem
Node
Password Enter the password used when this remote node calls your
Prestige.
Incoming: Rem
CLID This field is applicable only if Call Direction is either Both or
Incoming. Otherwise, a N/A appears in the field.
This is the Calling Line ID (the telephone number of the calling
party) of this remote node.
If you enable the CLID Authen field in Menu 13 – Default Dial In,
your Prestige will check the CLID in the incoming call against the
CLIDs in the database. If no match is found and CLID Authen is
Required, the call will be dropped.
Incoming: Callback This field is applicable only if Call Direction is Both. Otherwise,
a N/A appears in the field.
This field determines whether or not your Prestige will call back
after receiving a call from this remote node.
If this option is enabled, your Prestige will disconnect the initial
Enable
Disable