beautypg.com

ZyXEL Communications 480 User Manual

Page 62

background image

Prestige 480 ISDN Router

4-4

Remote Node Configuration

call from this node and call it back at the Outgoing Primary
Phone Number (see below).

Outgoing:

My Login
Name

This is a required field [?] if Call Direction is either Both or
Outgoing. Enter the login name for your Prestige when it calls
this remote node.

Outgoing:

My
Password

This is a required field [?] if Call Direction is either Both or
Outgoing. Enter the password for your Prestige when it calls this
remote node.

This field sets the authentication protocol used for outgoing calls.
Options for this field are:

CHAP/PAP - Your Prestige will accept either CHAP or PAP

when requested by this remote node.

CHAP/ PAP

CHAP - accept CHAP only.

CHAP

Outgoing:

Authen

PAP - accept PAP only.

PAP

Outgoing:

Pri(mary)
Sec(onda
ry) Phone
Numbers

Your Prestige always calls this remote node using the Primary
Phone number first for a dial-up line.

If the Primary Phone number is busy or does not answer, your
Prestige will dial the Secondary Phone number if available.

Some areas require dialing the pound sign # before the phone
number for local calls. A # symbol may be included at the
beginning of the phone numbers as required.

Edit PPP Options

To edit the PPP options for this remote node, move the cursor to
this field, use the space bar to select Yes and press [Enter]. This
will bring you to Menu 11.2 - Remote Node PPP Options. For
more information on configuring PPP options, see the section
Editing PPP Options.

Press space

bar to toggle

Yes then

press

[Enter]

Rem IP Addr

Enter the IP address of the remote gateway.

Telco Options:
Allocated Budget (min)

This field sets a ceiling for outgoing call time for this remote
node. The default for this field is 0 for no budget control.

Default = 0

Period (hr)

This field sets the time interval to reset the above outgoing call
budget control.

Transfer Type

This field specifies the type of connection between the Prestige
and this remote node. When set to Leased, the Allocated
Budget
and Period do not apply.

64k/

Leased