ZyXEL Communications 480 - Manual (Page 60)

Prestige 480 ISDN Router
4-2 Remote Node Configuration
Figure 4-1 Menu 11 – Remote Node Setup
When Menu 11.1. - Remote Node Profile appears, fill in the fields as described in the table below
to define this remote profile. The Remote Node Profile Menu Fields table shows how to configure
the Remote Node Menu.
Figure 4-2 Menu 11.1 Remote Node Profile
Menu 11 - Remote Node Setup
1. ChangeMe (ISP, SUA)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
9. ________
10. ________
11. ________
12. ________
Enter Node # to Edit:
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Call Direction= Outgoing
Incoming:
Rem Login= N/A
Rem Password= N/A
Rem CLID= N/A
Call Back=N/A
Outgoing:
My Login= ChangeMe
My Password= ********
Authen= CHAP/PAP
Pri Phone #= 1234
Sec Phone #=
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP = No
Telco Option:
Transfer Type= 64K
Allocated Budget(min)= 0
Period(hr)= 0
Carrier Access Code=
Nailed-Up Connection= No
Toll Period (sec)= 0
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Enter here to CONFIRM or ESC to CANCEL: