Yamaha SU700 - Manual (Page 76)

Chapter 2 T
utorial
76 Chapter 2 Tutorial
Procedure
1. Press the PAD FUNCTION [ON/MUTE] button.
2. We will start with the settings of the [TOP] and [G] scenes, and un-mute the CL1/2
tracks of track bank [1].
▼ Press the TRACK BANK [1] button to select track bank [1]. Then press the pads of
CL1/2 tracks to make the bracket ( ) appear for the CL1/2 tracks.
3. Press the PAD FUNCTION [PLAY] button.
4. Set the [SCENE/MARKER] switch to the SCENE position.
5. Continue pressing the [A] button until the display indicates “SCENE STORED.”
6. Release the [A] button. The settings have now been stored.
Using the same procedure as you did for Intro A and Ending B, store mute settings
for each scene button as described below.
● Break = scene button [B]
All tracks are muted.
TRACK LOOP C.LOOP FREE
BANK 1 2 1 2 3 4 1 2 3 4
[1]
Ч Ч Ч Ч Ч Ч Ч Ч Ч Ч
[2] Ч Ч Ч Ч Ч Ч Ч Ч Ч Ч
● Section A = scene button [C]
Un-mute the LOOP1/2, CL1/2, and FREE 1–4 tracks of track bank [1], so that they
will be heard.
Mute all FREE 1–4 tracks of track bank [2].
TRACK LOOP C.LOOP FREE
BANK 1 2 1 2 3 4 1 2 3 4
[1] Ч Ч
[2] Ч Ч Ч Ч Ч Ч Ч Ч Ч Ч
● Sections B and E = scene button [D]
Un-mute all tracks of track bank [1] so that they will be heard.
Mute all FREE 1–4 tracks of track bank [2].
TRACK LOOP C.LOOP FREE
BANK 1 2 1 2 3 4 1 2 3 4
[1]
[2]
Ч Ч Ч Ч Ч Ч Ч Ч Ч Ч