Yamaha SU700 - Manual (Page 110)

Chapter 2 T
utrial
110 Chapter 2 Tutorial
■ Modifying the sound
For the CL2 track, only the pitch will be different.
[Settings]
SOUND group .......... [PITCH] +100
Use the same procedure as for the LOOP 1 and 2 tracks to make settings.
■ Loop length setting
Using the same procedure as when you set the LOOP 2 track, set the sample loop
length of the CL2 track to “LOOP LENGTH=016.”
■ Recording to the sequencer
Now we will record the sample for the CL2 track on the sequencer.
The sample for the CL2 track will be looped over 16 quarter-note beats (four mea-
sures), and will sound for three beats from the second beat of measure 4. (See dia-
gram below.)
Begin recording as you did for the CL1 track. When you reach the second beat of
measure 4 (MEASURE display of 004:2), press and hold the CL2 pad. Release it after
three beats (immediately before you reach 005:1).
CL2 sample