Chapter 10, Procedure, Press event edit | measures – Yamaha SU700 User Manual
Page 257
Chapter 10 Jobs
257
CHAPTER
10
EXAMPLE:
The following shows what happens when you copy sequence data from a single measure
(measure 2) of a given track and insert the copy three times starting from measure 10 of
the same track.
1:1
2:1
3:1
:2
:3 :4
:2
:3 :4
:2
:3
9:1
10:1
11:1
12:1
13:1
14:1
:2
:3 :4
:2
:3 :4
:2
:3 :4
:2
:2
:3
:3
:4
:4
• • • •
• • • •
A
B
C
D
E
F
G
H
E
F
G
H
E
F
G
H
E
F
G
H W X
Y
Z
A
B
I
J
G
H
I
J
Procedure
1.
Be sure that the song you want to work in is currently selected.
You may find it convenient to stop the song at the first measure from which you want
to copy data.
2.
Press EVENT EDIT | MEASURES.
3.
If necessary, turn the dial to select COPY MEASURES. Then press [OK].
▼ The screen displays
SOURCE TRACK
, and the bank number and meter bracket in-
dicate the currently selected track (the last pad you pressed).
4.
Press a bank selector and track pad (as necessary) to select the track from which you
want to copy the sequence data. Then press [OK].
▼ The screen displays
FROM
M
xxx-yyy, prompting you to select the measures from
which you want to copy data. As the default,
xxx and yyy are both set equal to the
song’s current location.
5.
Adjust the values to select the segment from which you want to copy sequence data,
using
and
to move among the two parameters, and the dial to set each
value.
▼ The first value gives the starting measure; the second value gives the ending mea-
sure. If you set the values equal, the job will copy data from one measure only.
1
2
3
Sequence data