Yamaha SU700 - Manual (Page 144)

Chapter 4 SU700 Oper
ating M
odes
144 Chapter 4 SU700 Operating Modes
MAIN SCREEN and FUNCTION SCREEN
When you are working in PLAY STANDBY or PLAY mode, the SU700 may display ei-
ther the main screen or else a function screen. The main screen shows the song num-
ber and song name, while the function screen shows the name of the currently se-
lected knob function. (For a detailed description of the display confent of main and
function screens, refer to pages 25 to 26.)
When main screen is displayed:
Knobs and pads do not all control the same functions. Instead, each knob controls
the track’s default knob function, and each pad controls the track’s default pad func-
tion, as set up by the TRACK SET | MAIN job (
→
p.231). The screen does not indicate
the currently selected knob and pad functions-since the functions vary for each track.
You should keep in mind, however, that the bar meters do not show values for dif-
ferent functions at the same time: at any given time, the levels indicate the values for
the default knob function of the track you last accessed (the track whose pad or knob
you last touched). [On the first screen that comes up following power-on, the meters
show the LEVEL values.]
Note that operations available from the main screen are not identical to those avail-
able from the function screen: for example, the song can be selected only from the
main screen, not from the function screen. For details about operations available un-
der each mode and screen, see the table on page 145.
The following shows typical main and function screens, and indicates how you move
from one to the other.
Press
•Any KNOB FUNCTION button
•Any PAD FUNCTION button
•Any EFFECT SETUP button
•The JOB [DEFAULT] button
•The [MEASURE], [BPM], or
[NOTE] button
[CANCEL] button
Example shows LEVEL function screen