Yamaha SU700 - Manual (Page 189)

Chapter 7 Effects 189
CHAPTER
7
7.4 System Effects
All tracks (with the exception of the MASTER track) connect directly to all blocks
that contain system effects. If you place system effects into all three blocks, for ex-
ample, then all tracks (except for the MASTER track) will pass their output to all
three blocks.
When working with a system effect, you can control the effect level separately for
each track by pressing the appropriate [EFFECT] button ([EFFECT 1], [EFFECT
2], or [EFFECT 3]) and then turning the knobs. But note that the MASTER-track’s
knob in this case is disabled.
The following shows the function screen produced by pressing the [EFFECT 1] but-
ton, where the function assigned to block 1 is AMP SIM (the default), which is a sys-
tem effect. When working at this screen you can use the knobs to control the level on
all sample tracks and on the AUDIO IN track. But you will notice, if you try it, that
the knob for the MASTER track is disabled.
The following shows the connection configuration of system effect.
LOOP
FREE
A
UDIO IN
EFFECT 1
* The symbol means that that the level can be controlled by the track’s knob.
The MASTER track does not connect to blocks containing system effects. The MASTER track
knob cannot be used to control the levels to the blocks.
Output