Yamaha SU700 - Manual (Page 234)

Chapter 10 J
obs
234 Chapter 10 Jobs
Brackets
indicate
selected
track.
Track’s current filter type. Selected Bank
Procedure
Be sure that you have selected the song containing the track(s) that you want to set up.
1. Press TRACK SET | FILTER TYPE to enter this job.
▼ The screen appears as follows. The bank number and meter bracket indicate the
currently selected track (the last pad you pressed, except that if this was AUDIO IN
or MASTER then the fourth FREE track of the current bank).
2. If necessary, change the track selection by pressing the appropriate bank selector and
pad.
3. Turn the dial to select the filter type.
4. Repeat Steps 2 and 3 as necessary to review and change settings on all tracks you are
interested in.
5. Press [OK] or [CANCEL] to return to the main screen.
TRACK SET | NOTE ASSIGN
Use to: Select whether the track can or cannot play overlapping sounds.
●
This feature does not apply to AUDIO IN and MASTER tracks. You cannot select
these tracks when working on this job.
●
You can set the value to either of the following. The default is MULTI .
MULTI The track can play overlapping notes. If a new note-on occurs while
track is already playing a note event, the track will begin playback
for the new Note On while continuing the playback that is already in
progress.
SINGLE The track can only play one note event at a time. Occurrence of a
new note-on forces termination of a previously playing note (if any).