Chapter 2 – Yamaha SU700 User Manual
Page 109
Chapter 2 Tutorial
109
CHAPTER
2
Procedure
1.
Press the sequencer
button to move to the beginning of the song, and press the
button to enter record-ready mode.
2.
Press the [NOTE] button, and turn the dial to set Quantize to a quarter note ( ).
3.
Press the sequencer
button to start recording, and at the beginning of measure 3
(MEASURE display 003:1), press and hold the CL1 pad for five beats. Release the pad
immediately before you reach 004.2.
2.4.4 Creating the COMPOSED LOOP 2 track
■ Sampling
The CL2 track will use the same sample as the CL1 track, but we will modify its pitch.
For this reason, we won’t need to sample a sound for the CL2. We will simply copy
the sample from the CL1 track.
Procedure
1.
Press the [TRACK EDIT] button, and then press the top button [TRACK COPY].
2.
The display will indicate “SOURCE TRACK.” Press the CL1 pad (the copy source),
and then press the [OK] button.
3.
The display will indicate “DESY. TRACK.” Press the CL2 pad (the copy destination),
and then press the [OK] button.
4.
The sample will be copied, and the main display will reappear.