Yamaha SU700 - Manual (Page 332)

A
ppendix
332 Error Messages
TOO LONG Sample is too long.
TOO SHORT Sample is too short.
DIG-IN UNPLUGGED Digital or optical cable not connected or improperly con-
nected; or digital device’s power is off.
DIG-IN PARITY ER Unable to receive digital or optical signal. (Check the
connection and try again.)
EFFECT OVERFLOW Too much effect data. (SU700 unable to fully process the
effect data.)
NO SAMPLE Empty sample track selected for sample editing or as
destination for EVENT COPY job.
NO EVENTS No events available for editing.
IMPOSSIBLE Requested waveform processing is not possible.