Zebra Technologies P1013372-001 REV. A User Manual

Page 82

Zebra ZXP Series 8 Card Printer with Laminator

P1013372-001 Rev. A

Printer Settings and Adjustments

Card Printer Printing Preferences

Inhibit Pop-Up

The Inhibit pop-up window allows you to select the inhibit panel area for mag stripe, signature
panel, or other non-printing areas of a card. This window is available only when using ribbons
with an inhibitor panel; e.g., YMCKi.

To access the Inhibit pop-up window, select Start > Printers and Faxes. Right click on the
Zebra ZXP Series 8 Card Printer listing, and select Printing Preferences > Card Setup.
Select Ribbon info > Front Inhibit... or Back Inhibit...

The figure below shows settings for the front side of the card; settings for the back side of the
card are identical.

•

Select the inhibit panel area:

Disable Inhibit: Default.

Inhibit printing on magnetic stripe: Places a no-print zone arounnd the mag
stripe area.

Inhibit printing on smartcard contact: Places a no-print zone arounnd the
smartcard chip area.

Custom file based inhibit area: See below.

•

Bitmap based inhibit panel area: This option is enabled when Custom file based inhibit
area (see above) is selected. To locate the bitmap, click on the Browse button to bring up
a dialog for choosing the file.