Zebra Technologies P1013372-001 REV. A User Manual

Page 119

Cleaning

Cleaning the Laminator

P1013372-001 Rev. A

Zebra ZXP Series 8 Card Printer with Laminator

115

Step 8.

Insert the card into the slot (arrow below), adhesive side down.

Step 9.

Pull the card all the way through the Heater Assembly thereby cleaning the

heater rollers.

Step 10. Remove the card from the Heater Assembly.

Step 11. Turn the card over, adhesive side up; and repeat

Step 12. Reinstall the Heater Assembly.

Step 13. Close the Laminator Door.

Step 14. Press Exit on the OCP when done.