Zebra Technologies P1013372-001 REV. A - Manual (Page 182)

178 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Setting Custom Card Specifications
Adjustments
Step 4. Decrease Front Transfer Temperature:
a. Go to the Card Specifications window.
b. Make a note of the default front transfer temperature settings.
c. Decrease the appropriate (single or double side) front transfer temperature by 5.
d. Click on the OK button.
e. Print a test card.
f. Examine the test card; see Section B.3 .
• If there is noticeable improvement, continue decreasing the front transfer
temperature by 5, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required. If the problem persists,
contact Zebra Technical Support.
• If there is no noticeable improvement, return the front transfer temperature to
its default setting; and contact Zebra Technical Support.