Zebra Technologies P1013372-001 REV. A - Manual (Page 112)

108 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Cleaning
Cleaning the Printer
Cleaning the Rollers
Step 1. To initiate the cleaning process.
a. Press the MENU button on the Operator Control Panel (OCP). The OCP will
display the Main Menu.
b. Scroll through the Main Menu, and select Advanced Settings. The OCP will
display the Advanced Settings Menu.
c. Scroll through the Advanced Settings Menu, and select Clean Printer. The OCP
will display the Clean Printer Menu.
Step 2. To clean the X-Drive Rollers.
a. Select Clean Side Card Path to run the X-Roller Cleaning Routine.
b. Use the X-Roller Cleaning Card.
c. Follow the OCP instructions.
d. When complete, the OCP will return to the Clean Printer Menu.
Note • Do not use previously used cleaning cards.