Zebra Technologies P1013372-001 REV. A - Manual (Page 107)

ZXP Series Toolbox
Advanced Security
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 103
To change the Password:
1. Enter your password in the Old password field.
2. Enter the new password in the New password and the Confirm password fields.
3. Click on the Apply button.
Advanced Password:
This password provides access to service-related tests and adjustments via the Advanced
Setting button; see
Firmware and Settings on page 93 . Use is limited to Zebra-authorized
service personnel.
Last Print job option:
- The Erase job data following successful card printing option erases the print job after
successful card printing.
- The Retain job data after card printing option allows the print job to remain in
memory for multiple prints via the OCP.
The Save button saves your selection.