Zebra Technologies P1013372-001 REV. A - Manual (Page 104)

100 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
ZXP Series Toolbox
Technology
Technology
Magnetic Encoding
The Magnetic Encoding screen allows the user to test various magnetic encoding options. For
more information on magnetic encoding, refer to
Appendix D .
Settings: EIN options not implemented.
Read Data:
• Coercivity: Select either High or Low.
• Track selection:
- For encoding: Click on the checkboxes to select Track 1, Track 2, and/or Track 3;
enter the data to be written; and click on the Encode button.
- For reading: Click on the checkboxes to select Track 1, Track 2, and/or Track 3; click
on the Read button, and validate the data read.
Note • Magnetic Encoding and Smart Card default values are set via the Card type in use
option in the Card Setup tab, see page 73 )