Zebra Technologies P1013372-001 REV. A - Manual (Page 164)

160 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Setting Custom Card Specifications
Adjustments
Step 3. Increase Transfer Output Speed
a. From the Card Specifications window, make a note of the default transfer output
speed settings.
b. Increase the appropriate (single or double) transfer output speed by 0.2.
c. Click on the OK button.
d. Print a test card.
e. Examine the test card.
• If there is noticeable improvement, continue increasing the transfer output
speed by 0.2, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required; otherwise go to
Step 4 .
• If there is no noticeable improvement, return the transfer output speed to its
default setting; and go to Step 4 .