Zebra Technologies P1013372-001 REV. A - Manual (Page 78)

74 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Printer Settings and Adjustments
Card Printer Printing Preferences
Advanced Black Panel Options Pop-Up
The Advanced Black Panel Options pop-up window allows you to manage and configure
Black Extraction. This window is available when using Black Panel (K-Panel) ribbons; e.g.,
YMCK, YMCKK, etc.
This window controls how the driver selects the text and/or graphics to be printed with the
Black Panel.
To access the Advanced Black Panel Options pop-up window, select Start > Printers and
Faxes. Right click on the Zebra ZXP Series 8 Card Printer listing, and select Printing
Preferences > Card Setup. Select Ribbon info > K Front ... or K Back...
The figure below shows settings for the front side of the card; settings for the back side of the
card are identical.
• Set black panel extraction type:
- Disable black extraction treats all non-black specified elements as composite
black (YMC).
- Print YMC black under K is used to print composite black (YMC) under the K panel.
When selected, the operator can choose to do this by selecting certain areas or types of
data (e.g., text, graphics, etc) via the Area manager.
- Print all black data specifies all black data to be printed with K.
• Apply black extraction on: Specify Black text, Black graphics, or Black monochrome
bitmaps. The driver will automatically determine the best K-Panel setting based on the
card design elements.