Zebra Technologies P1013372-001 REV. A - Manual (Page 54)

50 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Operation
Manual Card Feed
Manual Card Feed
A Manual Feed Slot is available for feeding single cards. The Input Hopper must be empty for
single-card feeding to work properly.
1. Access the Card Setup Tab: Select Start > Printers and Faxes. Right click on the Zebra
ZXP Series 8 Card Printer listing; and select Printing Preferences > Card Setup.
2. From the Card Info > Card source dropdown menu, select the Single card feed slot
(circled above).
3. Click on the Apply button, and then click on the OK button.
4. Ensure that there are no cards in the Input Hopper.