Xerox 128 - Manual (Page 92)

3 - 4 6 DocuTech 128/155/180 HighLight Color Operator Guide
Routine maintenance
Figure 3-43 Q1213 sensor
4. Brush a folded sheet of paper across the sensor to clear any
obstruction.
5. Close the binder drawer and the finisher doors.
Clearing the Q1221, Q1218, and Q1227 sensors
NOTE: Production publisher configuration only
Clearing the Q1221, Q1218, and Q1227 sensors should be
performed only when directed by a Customer Support Center
Representative.
1. Open the finisher front doors.
2. Locate the Q1221, Q1218, and Q1227 sensors, as shown in
figure 3-44.