Cleaning the display, Cleaning the exterior surfaces of the system – Xerox 128 User Manual

Page 85

Text mode
Original mode

DocuTech 128/155/180 HighLight Color Operator Guide

3- 39

Routine maintenance

Figure 3-35 Q1164 sensor

Cleaning the display

The display should be cleaned as required.

Clean the display with a soft, lint-free cloth dampened with a glass
or lens and mirror cleaner. Do not spray the liquid directly onto the
display because it may cause damage.

Cleaning the exterior surfaces of the system

Clean the exterior surfaces of the printer daily, if possible.

Clean the exterior surfaces with a mild household detergent that
has been poured or sprayed onto a cloth lightly dampened with
water. Do NOT saturate the cloth; just dampen it.

CAUTION: Liquids must not be allowed to drip onto anything
electrical or mechanical. Also, never spray or pour any cleaner
directly onto the keyboard or the exterior surfaces of the system.