Stock satisfaction guides, Stock satisfaction guides -5 – Xerox 128 User Manual

Page 151

DocuTech 128/155/180 HighLight Color Operator Guide

5- 5

Technical information

the curl in the paper, refer to the “Routine maintenance” and
“Problem solving” sections of this guide.

Stock satisfaction guides

Table 5-1. Satisfaction guide for paper trays 1 and 2

Table 5-2. Satisfaction guide for paper tray 4 Interposer ONLY

NOTE: Production publisher configuration only

Stock

Reliable feeds may

be expected

Less reliable feeds may be

expected

Suggested alternatives

Size

8 x 10 inches to 9 x 14
inches (203 x 254 mm
to 229 x 356 mm)

Stock smaller than 8 x 10 inches
cannot be used.
For stock larger than 9 x 14
inches (229 x 356 mm), refer to
the tray 3 satisfaction guide.

Weight

Substance 20 to 110
(75 to 200 g/m2)

Substance 16 to 19 (60 to 72 g/
m2)

Weights outside the limits shown
are not recommended.
Substance 110 (200 g/m2) must
be long grain. Do not use short
grain.

Capacity

Tray 1 - 1100 sheets,
substance 20 (75 g/
m2)
Tray 2 - 600 sheets.
substance 20 (75 g/
m2)

For greater capacity, use tray 3.

Type or
condition

Xerographic bond
paper in good
condition Drilled
stock, fanned
thoroughly Tab stock
in perfectly flat
condition

Slightly curled paper intermixed
weight Transparencies Label
stock Adhesive drafting film
Paper with reinforced edges

Do no use excessively curled
paper.
Substance 110 (200 g/m2) must
be long grain Do not use short
grain.
Use transparencies with a white
stripe. Freshly printed offset
prints, use tray 3.
Refer to the “Using various
stocks” section for any stock not
defined in this guide.