Xerox 128 - Manual (Page 19)

DocuTech 128/155/180 HighLight Color Operator Guide 2-1
2 System components
The Xerox DocuTech HLC printers are electronic reprographics
systems. They are high volume printers available in multiple
configurations. These versatile, high performance printing
systems enable personal computers and other network-connected
devices (such as workstations and graphic scanners) to produce
documents incorporating graphics, forms, logos, signatures, and
fonts.
Electronic reprographics process
The Xerox DocuTech HLC system consists of a DocuSP controller
and a DocuTech printer.
DocuSP controller
The DocuSP controller accepts electronic print input created by
client software in ASCII, TIFF, HP PCL, PostScript, PPML, LCDS,
IPDS, VIPP or PDF format. This print input is passed on to the
system through a network connection. The DocuSP software
performs the necessary data conversion, creating an electronic
file which is stored temporarily in a print queue on the DocuSP
controller. This electronic image is then passed directly on to the
printer for production.
DocuTech Printer
The DocuTech 180 prints up to 180 prints per minute using 8.5 x
11 inch/A4 (216 x 279 mm) stock.
The DocuTech 155 prints up to 155 prints per minute using 8.5 x
11 inch/A4 (216 x 279 mm) stock.
The DocuTech 128 prints up to 128 prints per minute using 8.5 x
11 inch/A4 (216 x 279 mm) stock.
NOTE: The DocuTech HLC prints in black and white plus one
highlight color.
NOTE: Prints per minute vary, depending on paper size, for all
printers.