Tektronix Phaser 340 - Manual (Page 87)

Printing 3
User Manual 3-19
Margins and image area
The image area is the part of the media where the image appears. When the
printer places an image on the media, the image area is a bit smaller than the
actual media size. You may need to adjust the page margins in your
application software to match the image area. The printer must be set for the
correct size media through the printer driver.
The image area for the Phaser 340 color printer is 8.11 x 10.45 in. (Letter-size)
and 200 x 283 mm (A4-size). The difference between the image area and the
media size for the top margin and side margins is 5 mm (0.2 in.). The bottom
margin is 9 mm (0.35 in.).
Note For maximum print speed, set left and right margins to 0.3 in.
(7.4 mm) or larger.
The following illustration shows the image area and top, side and bottom
margins.
1. Letter-size: 8.5 x 11 in.
2. A4-size: 210 x 297 mm
9101-14
5 mm (0.2 in.)
5 mm (0.2 in.) 5 mm (0.2 in.)
9 mm (0.35 in.)
2 1
200 mm
283 mm
5 mm (0.2 in.)
5 mm (0.2 in.) 5 mm (0.2 in.)
9 mm (0.35 in.)
8.11 in.
10.45 in.