Tektronix Phaser 340 - Manual (Page 82)

3 Printing
3-14 Phaser 340 Color Printer
Media trays
Standard paper trays. The printer is shipped with a standard Letter- or
A4-size paper tray which holds 200 sheets (slightly less than one-half ream)
of paper.
Note The standard paper trays are designed for use with paper media.
You can use a standard paper tray for printing up to 50
transparency sheets. However you must use a Tektronix printer
driver to specify Transparency as the media type and confirm the
print at the front panel. Otherwise, transparency print quality is
lower.
Transparency trays. If you print on both paper and transparencies, consider
ordering a separate, dedicated transparency tray. This lets you quickly
switch between paper and transparency print jobs by simply swapping
media trays in the printer. Optional Letter- and A4-size transparency trays
have a capacity of 175 sheets (approximately three boxes). Refer to
“Optional media trays” on page B-3 for ordering information.
Lower Paper Tray Assembly. An optional Lower Paper Tray Assembly extends
the printer’s capabilities. Its 500-sheet capacity adds to the 200-sheet
capacity of the standard paper tray for high-volume printing environments.
When the upper tray is loaded with a second media type such as
transparencies or letterhead, the printer then supports printing of two media
types without the need to swap trays.
Note The Lower Paper Tray Assembly only accepts paper media; it
should not be used with label stock or transparency media.